Effects pedals at Bass Direct: Source Audio, Soundblox®, Bass Envelope filter Pro for bass, guitar:: For sale, UK, EU

 

Source Audio Soundblox® Pedals

Distortion Pro | Distortion | Envelope filter Pro | Envelope filter | Graphic EQ | Nemesis | Aftershock

Distortion 2 | Reverb 2 | Orbital Modulator | OFD Modeller | Manta | HUB | Gemini | Mercury | Soleman


DISCONTINUED

Add £10 EU (outside UK) shipping






Soundblox® Pro Bass Envelope Filter

The Soundblox Pro Bass Envelope Filter is an evolution of its hugely popular predecessor, the standard Soundblox BEF. As before, there are 22 different envelope filter effects to choose from including 2 Pole and 4 Pole Low Pass variations, Single Peak, Triple Peak, Peak/Notch variations, as well as Phaser settings. Each of these settings can be further modified with a variety of control options including positive/negative filter sweeps, sweep range, attack and decay speed settings, or frequency range selection.

In this Pro version, users are able to choose from four different modulation sources including standard envelope filter sweeps, selectable LFO wave forms, a passive expression pedal and the Hot Hand motion sensing ring. An expression pedal input can be used to control filter modulation like in a standard wah pedal or a wide variety of parameters including sweep range, effect selection, LFO speed and more. As in our other Pro Series pedals, the BEF Pro features three footswitches to hold six customisable pre-sets but also includes an option for Tap Tempo LFO on one of the footswitches.

BASS ENVELOPE FILTER PRO INTERFACE

I/O PORTS


SOUNDBLOX PRO BASS ENVELOPE FILTER FEATURES & SPECIFICATIONS

•22 Filter Sounds including 2 Pole Low Pass, 4 Pole Low Pass, Single Peak, Triple Peak, Peak & Notch, and Phasers.

•Positive and Negative filter sweep with variable range and sensitivity.

•Wet/Dry Mix knob featuring our signature low-end preserving algorithm ‘Lo-Retain™’.

•4 modulation sources including envelope, LFO, expression pedal and Hot Hand.

•Tap tempo speed control for LFO.

•State-of-the-art DSP — Our proprietary 56-bit Digitial Signal Processor, the SA601, and crystal clear 24-bit converters.

•6 user pre-sets — Easy to configure user pre-sets in two banks selectable via 3 footswitches for quick access of your favourite sounds.

•7-Band Equaliser — Ultra precise 7-band equaliser for in-depth tone control saved per pre-set.

•Extended Control — An expression input allows for control of a wide variety of pedal parameters. A MIDI input also allows external access to pre-sets and parameters.

•Motion Control — All Soundblox and Soundblox Pro pedals are ‘Hot Hand Ready®’ and can be used with any Hot Hand motion sensor to extend the capabilities of the unit.

•Active Analogue Bypass — Bypass is fully routed around the DSP and active input ensure zero signal degradation.

•9V DC power supply included.

•Dimensions: 7 in./17.8 cm (length not including I/O jacks) x 6 in./15.25 cm (width) x 2 in./5 cm (height, including knobs).











Dual Expression pedal


The Source Audio Dual Expression Pedal delivers precision response and smooth action in a durable cast aluminum housing. Dual TRS expression outputs make it possible to control two effects units simultaneously. The pedal is compatible with any model or brand of effect that features a TRS expression input. The Range Adjust Knob sets the bottom point of the expression range. Plus, a special Sensor Output connects directly to any Hot Hand®, Soundblox®, Soundblox 2, or Soundblox Pro pedal for real-time control over filter sweeps, effect modulation, LFO speeds, wet/dry mixes, drive levels and more.

DUAL EXPRESSION PEDAL PORTS


DUAL EXPRESSION PEDAL FEATURES & SPECIFICATIONS

  1. 1Two Isolated TRS Expression Outputs – simultaneous control over multiple effect pedals or rack systems.

  2. 2Sensor Output — 1/8-inch; four conductor output compatible with all Soundblox, Soundblox 2, or Soundblox Pro pedals.

  3. 3Range Adjust Knob — Adjusts the range of expression signal sent through the outputs.

  4. 4OUTPUT 1: sends expression signal out via either 1/4 inch TRS cable or 4 conductor Soundblox compatible 1/8 inch sensor cable.

  5. 5OUTPUT 2: sends expression signal out via 1/4 inch TRS cable.

  6. 6Rugged, cast aluminum housing.

  7. 7Includes one 1/4-inch TRS connector cable and one 1/8 inch four conductor Sensor Output cable

  8. 8Dimensions: 10 in/25.4cm (Length) x 4 in/10.2cm (width) x 3 in/7.6cm (height)



SA115 Hot Hand® Wireless Adapter £139.99


Description: 

The Hot Hand 3 Universal Wireless Effects Controller expands significantly on the breakthrough technology of the original Hot Hand, broadening its compatibility to include non-Source Audio pedals. A 3-axis accelerometer translates motion into a dynamic and precise expression signal, which can be applied to a range of effect parameters, including filter sweeps, drive levels, modulation, and wet/dry mixes. The lightweight and wireless ring is capable of transmitting over 100 feet and fits comfortably on the hand, foot, or instrument headstock.

Hot Hand 3 connects to all Soundblox®, Soundblox 2, Soundblox Pro, or Hot Hand pedals via the 1/8” SENSOR OUTPUT. The receiver base station also features a standard 1/4” EXPRESSION OUTPUT compatible with most third-party pedals equipped with a 1/4” expression input, like the Boss PS-5 Pitch Shifter, Eventide Space Reverb, Line 6 DL4, and many more.

The system consists of a wireless sensor ring, ring charger/DC power supply, receiver base station, and sensor cable. The ring is powered by a rechargeable/replaceable lithium ion battery, with an average operation time of 6 hours between charges.

Features & Specifications:

·         Compatible with all Soundblox, Soundblox 2, Soundblox Pro and Hot Hand pedals.

·         Works with most third-party effects equipped with a 1/4” expression input. DIP switches facilitate third-party effect configuration.

·         Select between 3 different motion axes (X,Y, and Z).

·         RF transmitter capable of transmitting over 100 feet.

·         Rechargeable/replaceable lithium ion battery.

·         1/8” SENSOR OUTPUT and 1/4” EXPRESSION OUTPUT.

·         DEPTH and SMOOTHING controls adjust effect amount and ring sensitivity.

·         All components are compatible with the original Hot Hand Wireless Adapter (SA110) 

·         Use up to 4 units simultaneously with no interference.



 

Tel: 01926 886433