<Previous item | Next item>

Ashdown ABM 500 C115 combo

£250 + £10 UK shipping

Please contact the shop to pay by Bank Transfer

1. •Secondhand all original combo in great condition with cover
   

2. •Actual amplifier shown, please click on images to enlarge;
   

The ABM 500 EVO III is a 575 watts RMS bass amp head designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones.

Also footswitchable is the on-board compressor and the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM 500 EVO III features a front-panel mounted balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. A new upgraded power section has faster transient attack, more headroom and even less noise.

Ashdown BlueLine speakers are specially developed to achieve a superb balance of power, transparency and deep, controlled low end, without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound

1. •Power Output (RMS) 575W Bi-amped digital
   

2. •Power Requirement 230 / 115V
   

3. •Speaker Configuration 1 x 15" BlueLine bass driver
   

4. •Frequency Response -3dB at 17Hz and 30kHz
   

5. •Speaker Outputs Minimum impedance 4 Ohms
   

6. •High Instrument Input Impedance 3.9m Ohms, input range 150mV - 20mV p-p
   

7. •Low Instrument Input Impedance 10k Ohms, input range 300mV - 40V p-p
   

8. •Line Input Impedance 22k Ohms, input level 0dBu nominal
   

9. •Sub Output Impedance 1k Ohms, level 0dBu Nominal
   

10. •DI Output 600 Ohms balanced, level 0dBu nominal
    

11. •Tuner Output Impedance 22k Ohms, level 0dBu nominal
    

12. •EQ Bass +/-15dB @ 45Hz
    

13. •Middle +/-15dB @ 660Hz
    

14. •Treble +/-15dB @ 7kHz shelving
    

15. •Slider 1 +/-15dB @ 180Hz
    

16. •Slider 2 +/-15dB @ 340Hz
    

17. •Slider 3 +/-15dB @ 1.3kHz
    

18. •Slider 4 +/-15dB @ 2.6kHz
    

19. •Shape (Push Flat) +8dB @ 50Hz & 4kHz, -8dB @ 400Hz, filter slope - 6dB/octave
    
    

20. •Effects Send Impedance 22k Ohms, level 0dBu nominal
    
    

21. •Effects Return Impedance 22k Ohms, input level 0dBu Nominal
    

22. •H x W x D (mm) 587 x 610 x 335
    

23. •Weight (kg) 28
    

Tel: 01926 886433

1. Home
   

2. Special offers
   

3. Contact us
   

4. Testimonials
   

5. ------------------
   

6. Bass Guitars
   

7. ------------------
   

8. Amplification
   

9. Aguilar
   

10. Darkglass
    

11. EBS
    

12. EICH
    

13. EA
    

14. Genzler
    

15. Mark Bass
    

16. Mesa Boogie
    

17. PJB
    

18. Trace Elliot
    

19. Trickfish
    

20. Vanderkley
    

21. Used & Ex Demo
    

22. ------------------
    

23. Effects Pedals
    

24. ------------------
    

25. Accessories