Dingwall Z3 5, Quilted maple top, Trans White, 3 band eq, five string, Maple, GLOCKENKLANG PREAMP:: Custom hand made basses, exclusively at Bassdirect, UK, USA, Birmingham, London, Manchester

 

This Z3 is a stunning instrument, the dual-density swamp ash body is topped by a sleek piece of 5A quilt maple and finished in a satin, trans-white gloss.. The Z3 pickup arrangement is the ultimate in versatility providing a broad range of tones that although emulate the three most popular production basses of the last 50 years supersede them in terms of range of tones, clarity, evenness and overall ease of dialling in the perfect bass tone for any given song. The switching system provides a wide variety of tones but is simple and intuitive to use. The 3-band Glockenklang pre-amp provides studio quality tone shaping with a unique treble control that doubles as a tone control when switched to passive. The maple neck is double reinforced with heavy-duty carbon fibre. The Ziracote fingerboard is inlayed pearl speedo bars and luminlay side dots. The 24 banjo (small) sized frets play effortlessly from the first fret to the last. The Dingwall logo Gotoh tuners are precise and smooth. Z3 - the ultimate bass?


Actual bass shown, please click on images to enlarge;










Dingwall set out to capture the best qualities of the classic swamp ash tone, they  placed the pickups in the same relative positions as traditional designs so that even though the Z Series basses speak with greater power, clarity and punch, they still have a familiarity to the tone that fits perfectly with any genre of music. The streamlined neck and body shape result in ergonomic perfection.


  1. Z 3 SPECIFICATIONS:

  2. Maple neck

  3. Fingerboard - Ziracote - £230 option

  4. 24 frets

  5. Matching headstock veneer and finish

  6. White Pearloid Speedo bars - £240 option

  7. Blue Luminlay side dots - £60 option

  8. Body - Dual density swamp ash

  9. Top: 5A Quilted maple - £615 option

  10. Finish - Satin Trans Whiteburst - £150

  11. Dingwall USA strings - buy HERE

  12. Electronics

  13. Neodymium pickups

  14. Rotary pickups selector

  15. 2 x series/parallel switches, 1 x mid range switch

  16. Active Glockenklang bass/mid/treble with active/passive switching, (the treble works as a passive tone in passive mode) and switchable mid range

  17. Magnetic battery compartment cover

  18. Case - NEW Dingwall logo gig bag

  19. Hipshot Satin black lightweight tuners

  20. Custom Dingwall Bridge (Black finish), 18mm string spacing

  21. Weight - 8lb 12oz/3.95kg

  22. Manufactured in Canada


















































Pickups on the Z series

FD3 Neodymium pickups for a wide and even frequency response.


ELECTRONICS ON Z series

Rotary switch
All Dingwall basses (except Combustion) feature a 4-position rotary pickup selector. The pickup combinations are bridge pickup soloed, both in parallel, both in series, neck pickup soloed.

Pre-amp

In the past we’ve used Bartolini, Aguilar and now Glockenklang pre-amps.  These are all top-notch, high-quality pre-amps. What we like about the Glockenklang pre-amps is the smooth and subtle tone shaping and the Active/Passive treble control. We’ve spent a lot of time perfecting the natural tone of our basses so that they don’t need a lot of tone adjustment. The Glockenklang really fits well with this philosophy. The Active treble boosts and cuts as expected in active mode but when the pre-amp is switched to passive mode, the control is switched to a passive cut control. This is essentially like having two basses with two distinct characters. One active and one passive.


** HIGH DENSITY / LOW DENSITY SWAMP ASH ON Z SERIES

The use of high density Swamp Ash on the bass side increases sustain, clarity and punch of the B and E strings. Low density Swamp Ash on the treble side keeps the G and D strings nice and warm sounding.


The dual density concept used in the Lee Sklar and Prima Artist series was such a success it led us to trying it in a slightly different way on the Z-series bodies.


Swamp ash is a highly sought after, great sounding wood.  The problem for luthiers is that it is also very inconsistent weight wise.   Not only from board to board, but from one end of a board to the other!  This is why you see such a variance in the weights of swamp ash basses.


Using our dual density concept we separate the dense, heavy blanks from the lightweight ones.  The heavier blanks get used for bass sides only and light ones get used for the trebles.  Not only does this provide the tonal benefits of the dual density system, but also all of our swamp ash basses are very consistent in weight and tone.


NECK CONSTRUCTION ON Z SERIES

We take neck construction very seriously due to our extensive experience in guitar repairs coupled with our geographic location and corresponding extreme climate.  In my years in the guitar repair business I constantly had to deal with humidity related problems made worse by the huge temperature and humidity swings of our local climate. Many of these problems could have been minimised through simple design changes and materials choices.


Touring musicians are constantly amazed at how stable Dingwall instruments are.  Many state that their Dingwall necks are as stable as their graphite necked instruments.

We’ve experimented with many different laminations and have found a 5-piece maple construction to be among the best. Years of experience have proven this design to be extremely stable and reliable while minimising dead spots.


Premier Guitar Review September 2011 By David Abdo

Listen: Bridge Pickup

Listen: Neck Pickup

Listen: Jazz

Listen: Stingray-style

It’s been 60 years since the electric bass was born, and since then bass builders have done their best to improve on an already solid design. Craftsman Sheldon Dingwall and his team at Dingwall Guitars challenge tradition by creating instruments that address many issues with bass design, while keeping their eyes on aesthetics and their ears on classic tones. A prime example of this is the Z3—a striking bass that challenges convention with thoughtful features and versatile sounds.

Bass-ic Innovations

Under the Z3’s gorgeously deep, candy-purple finish is a unique approach to body design. The woods are chosen based on how they complement the different vibrations of the strings. For instance, the bass side of the body has a heavier, denser piece of swamp ash, while the treble side consists of a softer, lighter piece of swamp ash. Dingwall believes this dual-density approach achieves a greater tonal balance across the instrument.

While the body shape is one of the Z3’s more subtle qualities, the neck is the most eye-catching feature of the instrument. The thin, C-shaped neck is constructed from five pieces of maple, and it’s topped with a flat, beautiful wenge fretboard that uses small banjo frets in an arrangement based on the Novax Fanned-Fret system. Fanning the frets creates different scale lengths for each string, ranging from 34" on the 1st string up to 37" on the 5th string. While these scale lengths provide consistency in tone and tension, it could be a challenge to find replacement strings for such a long 5th string—unless you use Dingwall’s line of strings. To that end, the forum on Dingwall’s website has a section dedicated to helping players find suitable strings from other manufacturers.

The Dingwall-designed bridge is impressive, with qualities that almost make other bridges look inferior. Its plate is countersunk into the body, it features individual saddles for each string, and the strings are held in place by a pin that slides into the hole in the ball end of the string. Reportedly, the benefit of the latter feature is that it minimizes stress points on the string and makes it easier to remove strings after breakage. Other special Z3 features include a compound-angled headstock, a Hipshot Xtender key for the 5th string, and a brilliantly devised magnetic battery compartment. Throw in a Neutrik locking jack and heavy-duty mounting bolts, and you have an instrument built for durability and performance.

Good Things Come in Threes (and Sometimes Fours)

The Dingwall Z Series consists of three models—the Z1, Z2, and Z3. The only difference between the three is the configuration of Dingwall’s Super-Fatty pickups. The Z1 uses two pickups with spacing similar to a 1960s Jazz bass, while the Z2 clusters the pickups toward the bridge for a punchy, Music Man StingRay-like tone. The Z3 is loaded with three pickups and combines the positions of the Z1 and Z2 basses for the best of both worlds. The Super-Fatty pickups match well with the included 3-band Glockenklang preamp, which enhances the tone in active mode, and provides a treble cut in passive mode. Each pickup is also wired with a series/parallel switch.

While some basses use a blend control between pickups, the Z3 uses a 4-position rotary selector to engage different pickup combinations. Position 1 solos the bridge pickup, position 2 activates the two pickups closest to the bridge, position 3 turns on the outer pickups (J-bass style), and position 4 solos the neck pickup.

Don’t Fret About Fanning!

“How does it play?” When fellow bassists inspected our review model, every one of them asked that question. They are not alone, for this inquiry is discussed in bass chat rooms across the Internet. The fanned frets may look daunting, but they really aren’t. As with any new instrument, playing the Z3 entails an initial period of adjustment during which you recalibrate muscle memory for the new set of measurements and spacing. I’ve spent many years playing basses with a 34" scale, and I found it took very little time to feel at ease with the varying scale lengths of the Z3.

To get comfortable with the fanned frets, I stood in front of a mirror in a natural playing position and gradually slid my hand from the halfway point all the way up the neck, which allowed me to watch the positioning of my fingers over the fanned frets. Surprisingly, my technique did not require much adjustment as I transitioned from the lower register to the upper part of the fretboard. After a few minutes of this, I looked away from the neck to allow muscle memory to take effect. There were occasions when I missed notes, but I didn’t find it to be any different than adjusting to a 35" scale bass with standard fret positioning. By the second day, I felt more confident playing the fanned frets and the Z3 actually began to feel more comfortable than the basses in my collection.

In fact, I found that the fanned frets were to be appreciated, not feared: They cater to the natural shape of the hand moving up and down the fretboard. Bassists with solid left-hand technique should find it quite refreshing. My only issue with the neck design was that it was slightly difficult to reach notes past the 21st fret on the 5th, 4th, and 3rd strings. Though these notes are available on other parts of the bass, an instrument of this caliber should provide easier access to the upper portions of the fretboard.

Out of the Practice Room . . .

If I had to describe playing the Z3 in two words, I would say “balanced” and “versatile.” The ergonomics are excellent. On a strap, the bass doesn’t shift, regardless of whether it’s at an angle or played horizontally. And the weight is evenly distributed, too—I never felt back pain or shoulder strain while playing it. I’ve never been a big fan of thin necks, but the neck on this bass—which is tung-oiled and thinly coated with polyurethane—felt smooth, fast, and very comfortable.

The aforementioned construction goals of the Z3 were confirmed when plucking the strings. Tension on each string was very even, making 16th-note runs and string crossing a breeze. Expert slappers may find the spacing between the neck pickup and the fretboard too narrow for two-finger popping, but Dingwall also offers other basses that will appease thumb players.

Tonally, the Z3 is a Swiss Army knife. I played it through a Genz Benz ShuttleMAX 9.2 head driving a Glockenklang Quattro 410 cab, a Glockenklang Soul head driving two Glockenklang Space Deluxe 1x12s, and an Eden WT800 driving an Eden 1x15 cab. With all of these rigs, I was able emulate the punch of a StingRay or the warm, plucky sounds of a Jazz bass with a simple turn of the pickup selector. I compared it to my 1964 Fender Jazz bass and a 5-string StingRay, and it was sonically spot-on. The only difference was that the Dingwall conveyed these tones with more clarity and a more even fundamental note.

. . . And onto the Stage

In live settings, the Z3 sat firmly within the mix and was so responsive that I easily articulated my own voice. Every note was delivered with great definition—from the lowest notes of the 5th string to the upper portion of the 1st string. I was also able to adapt it to many different musical styles. The deep growl of the neck pickup was great on blues gigs, the punch and crunch of the humbucker was ideal for rock, and the J-bass position worked well for R&B and fusion. In each scenario, I was impressed with the its ability to rise to the occasion.

The Verdict

The Dingwall Z3 is impressive in sound, look, and feel, and would suit studio bassists or players who perform multiple styles of music. The multiple scale lengths and slapping-space issues may frustrate some, but anyone else who invests in this boutique beauty will be thrilled with its quality components, impeccable playability, and pristine tone.

Rating...

Buy if...

you seek a boutique bass with clarity, definition, and a multitude of tones.

Skip if...

you prefer traditional looks, slap a lot, or are on a budget.

Dingwall Guitars

Street $5610

 

Tel: 01926 886433








Nine months interest free credit on up to £2000 on Instrument purchases! For UK residents aged between 16 and 25.






















 

Models | >In Stock | On Order | SOLD

<Previous bass | Next bass>


Dingwall Z3 5, Quilted maple top, Trans White, 3 band eq (list £5950)

£5350 FREE UK mainland shipping

Add £30 EU (outside UK) shipping





Please call or email if you wish to pay by Bank Transfer

  1. Export price £4458 - Please contact us for international shipping rates