Accessories at Bass Direct: Source Audio, Soundblox®, Tri Mod Wha, guitar:: Basses and Guitars

 

Source Audio Soundblox® Pedals

Distortion | Graphic EQ | Nemesis | AftershockDistortion 2 | Reverb 2 | Orbital Modulator

OFD Modeller | Manta | HUB | Gemini | Mercury | Soleman | Reflex


NEW Soundblox Tri Mod Wha  £59.99 + UK mainland shipping  In stock now!

  1. +£6 Mainland EU/Ireland shipping (£10 in total)


Soundblox® Tri-Mod Wah


The Tri-Mod Wah is an evolutionary outgrowth of the original Hot Hand® Wah Filters system in a compact and accessible format. There are 11 Wah effects that range from Classic Wah through Low, Band Pass and Multipeak variations, that can all be further modified using either a Hot Hand motion controller, LFO (Low Frequency Oscillator) or Envelope Follower.

All Soundblox effects pedals are compatible with the Hot Hand Motion Controller — available separately in wireless or wired configurations — or an extensive range of on-board controls. Soundblox pedals provide a wide variety of original sounding effects in a sleekly designed, rugged package that is easy to use and highly flexible.

TRI-MOD WAH INTERFACE

Roll your mouse over hot spots (+) on the panel controls and ports to learn about each one.







I/O PORTS

Roll your mouse over hot spots (+) on the ports to learn about each one.






SOUNDBLOX TRI-MOD WAH FEATURES & SPECIFICATIONS

  1. 111 Wah sounds, including Classic Wah, 2 Low Pass filters, 2 Band Pass filters and 6 Multipeak filters.

  2. 23 Modulation Source Options: LFO, Envelope Follower, and Hot Hand® Motion Sensor.

  3. 3Modern Design — a thoughtfully designed box that features rugged construction and sleek looks.

  4. 4State-of-the-art DSP — our proprietary 56-bit Digital Singal Processor, the SA601 and crystal-clear 24-bit converters.

  5. 5Motion Control — all Soundblox™ pedals are "Hot Hand® Ready" and can be used with any Hot Hand® motion sensor to extend the capabilities of the unit.

  6. 6Active Analog Bypass — bypass is fully routed around the DSP and active input ensures zero signal degradation.

  7. 7Dimensions: 7 in./17.8cm (length not including I/O jacks) x 4 in./10.2cm (width) x 2 in./5cm (height, including knobs).

  8. 8Power supply not included. Click here to view recommended power supply and purchasing information.

RECOMMENDED POWER SUPPLY

Standard Soundblox pedals do not ship with a power supply. Click here to view recommended power supply and purchasing information.























Dual Expression pedal - £104.95


The Source Audio Dual Expression Pedal delivers precision response and smooth action in a durable cast aluminum housing. Dual TRS expression outputs make it possible to control two effects units simultaneously. The pedal is compatible with any model or brand of effect that features a TRS expression input. The Range Adjust Knob sets the bottom point of the expression range. Plus, a special Sensor Output connects directly to any Hot Hand®, Soundblox®, Soundblox 2, or Soundblox Pro pedal for real-time control over filter sweeps, effect modulation, LFO speeds, wet/dry mixes, drive levels and more.

DUAL EXPRESSION PEDAL PORTS


DUAL EXPRESSION PEDAL FEATURES & SPECIFICATIONS

  1. 1Two Isolated TRS Expression Outputs – simultaneous control over multiple effect pedals or rack systems.

  2. 2Sensor Output — 1/8-inch; four conductor output compatible with all Soundblox, Soundblox 2, or Soundblox Pro pedals.

  3. 3Range Adjust Knob — Adjusts the range of expression signal sent through the outputs.

  4. 4OUTPUT 1: sends expression signal out via either 1/4 inch TRS cable or 4 conductor Soundblox compatible 1/8 inch sensor cable.

  5. 5OUTPUT 2: sends expression signal out via 1/4 inch TRS cable.

  6. 6Rugged, cast aluminum housing.

  7. 7Includes one 1/4-inch TRS connector cable and one 1/8 inch four conductor Sensor Output cable

  8. 8Dimensions: 10 in/25.4cm (Length) x 4 in/10.2cm (width) x 3 in/7.6cm (height)



SA115 Hot Hand® Wireless Adapter £139.99


Description: 

The Hot Hand 3 Universal Wireless Effects Controller expands significantly on the breakthrough technology of the original Hot Hand, broadening its compatibility to include non-Source Audio pedals. A 3-axis accelerometer translates motion into a dynamic and precise expression signal, which can be applied to a range of effect parameters, including filter sweeps, drive levels, modulation, and wet/dry mixes. The lightweight and wireless ring is capable of transmitting over 100 feet and fits comfortably on the hand, foot, or instrument headstock.

Hot Hand 3 connects to all Soundblox®, Soundblox 2, Soundblox Pro, or Hot Hand pedals via the 1/8” SENSOR OUTPUT. The receiver base station also features a standard 1/4” EXPRESSION OUTPUT compatible with most third-party pedals equipped with a 1/4” expression input, like the Boss PS-5 Pitch Shifter, Eventide Space Reverb, Line 6 DL4, and many more.

The system consists of a wireless sensor ring, ring charger/DC power supply, receiver base station, and sensor cable. The ring is powered by a rechargeable/replaceable lithium ion battery, with an average operation time of 6 hours between charges.

Features & Specifications:

·         Compatible with all Soundblox, Soundblox 2, Soundblox Pro and Hot Hand pedals.

·         Works with most third-party effects equipped with a 1/4” expression input. DIP switches facilitate third-party effect configuration.

·         Select between 3 different motion axes (X,Y, and Z).

·         RF transmitter capable of transmitting over 100 feet.

·         Rechargeable/replaceable lithium ion battery.

·         1/8” SENSOR OUTPUT and 1/4” EXPRESSION OUTPUT.

·         DEPTH and SMOOTHING controls adjust effect amount and ring sensitivity.

·         All components are compatible with the original Hot Hand Wireless Adapter (SA110) 

·         Use up to 4 units simultaneously with no interference.



 

Tel: 01926 886433