Source Audio,Soundblox® 2 Manta filter pedal:: For sale, UK, EU, Bass, guitar effects at Bass Direct, Warwick, London, Manchester, Birmingham, USA

 

Source Audio Soundblox® Pedals

Graphic EQ | Nemesis | Aftershock | Distortion 2 | Orbital Modulator

Ventris | OFD Modeller | >Manta | HUB | Gemini | Mercury | Soleman


Soundblox2 Manta Filter  £149.99 free UK shipping

  1. +£10 Mainland EU/Ireland shipping for outside UK





Soundblox® 2 Manta Bass Filter














The Soundblox 2 Manta Bass Filter is the next generation of the popular Soundblox Pro Bass Envelope Filter. The Manta features 12 finely crafted filter effects plus eight variations of distortion, a feature not seen before in the Soundblox line of filter effects. These Distortion Types are not just crunch, or amp simulation; they are specifically designed to work in tandem with the filter effect selections. The pedal’s filters are controllable by its 2 envelope followers, or sine, square, and saw tooth LFO. Plus, like all Soundblox 2 pedals, the Manta is compatible with the Source Audio Dual Expression Pedal, the Hot Hand 3 Wireless Effects Controller, or MIDI control signals via the Soundblox HUB.

The Manta features a very unique signal path, internally splitting the instrument’s dry and distorted signals. The dry signal alone controls the envelope, increasing the playing response from the filter. The pedal’s 12 filter effects include 2 and 4-pole Low-Pass, Single-Peak, Multi-Peak, and Phasers. The Distortion Types include Hard and Soft clip, Octave distortion, Fold-back, Quantized, and synth-like Gated Fuzz. Each distortion has independent gain levels adjusted by the Drive control.

MANTA BASS FILTER INTERFACE

Roll your mouse over hot spots (+) on the panel controls and ports to learn about each one.




I/O PORTS

Roll your mouse over hot spots (+) on the ports to learn about each one.







SOUNDBLOX 2 MANTA BASS FILTER FEATURES & SPECIFICATIONS

  1. 1Diverse Sound Palette — Features up to 24 different Low Pass, High Pass, Band Pass, Single Peak, Multi-Peak, and Notch filters.

  2. 2Deep Control Set — Access to control parameters typically found in only professional rack-mount effects, or computer software.

  3. 3Drive/Distortion Type — Add a variety of gain and distortions to any of the Manta’s effects for an added boost and flavor.

  4. 4State-of-the-Art DSP — Our proprietary 56-bit Digital Signal Processor, the SA601, and crystal clear 24-bit converters.

  5. 5Multi-Function Jacks — Use the Source Audio Hot Hand motion sensors, or Dual Expression Pedal, for on-the-fly control over modulation or any adjustable parameter.

  6. 6MIDI Capable — Use the Soundblox HUB (connected to the Multi-Function Input) to allow MIDI access to controlling parameters, and save up to 128 user presets.

  7. 7Universal Bypass — Select either analog buffered or relay based True Bypass.

  8. 8Compact, rugged, cast aluminum housing.

  9. 99V DC power supply included

  10. 10Dimensions: L: 4.5in/11.4cm x W: 4.5in/11.4cm x H: 2.25in/5.7cm (including knobs)


Shown below from L- R;, OFD Modeller, MANTA, Orbital Modulator, Multi-Wave distortion, MOOER wireless power supply, Hot Hand 3, Pedaltrain MINI pedal board



















Dual Expression pedal - £104.95


The Source Audio Dual Expression Pedal delivers precision response and smooth action in a durable cast aluminum housing. Dual TRS expression outputs make it possible to control two effects units simultaneously. The pedal is compatible with any model or brand of effect that features a TRS expression input. The Range Adjust Knob sets the bottom point of the expression range. Plus, a special Sensor Output connects directly to any Hot Hand®, Soundblox®, Soundblox 2, or Soundblox Pro pedal for real-time control over filter sweeps, effect modulation, LFO speeds, wet/dry mixes, drive levels and more.

DUAL EXPRESSION PEDAL PORTS


DUAL EXPRESSION PEDAL FEATURES & SPECIFICATIONS

  1. 1Two Isolated TRS Expression Outputs – simultaneous control over multiple effect pedals or rack systems.

  2. 2Sensor Output — 1/8-inch; four conductor output compatible with all Soundblox, Soundblox 2, or Soundblox Pro pedals.

  3. 3Range Adjust Knob — Adjusts the range of expression signal sent through the outputs.

  4. 4OUTPUT 1: sends expression signal out via either 1/4 inch TRS cable or 4 conductor Soundblox compatible 1/8 inch sensor cable.

  5. 5OUTPUT 2: sends expression signal out via 1/4 inch TRS cable.

  6. 6Rugged, cast aluminum housing.

  7. 7Includes one 1/4-inch TRS connector cable and one 1/8 inch four conductor Sensor Output cable

  8. 8Dimensions: 10 in/25.4cm (Length) x 4 in/10.2cm (width) x 3 in/7.6cm (height)



SA115 Hot Hand® Wireless Adapter £139.99


Description: 

The Hot Hand 3 Universal Wireless Effects Controller expands significantly on the breakthrough technology of the original Hot Hand, broadening its compatibility to include non-Source Audio pedals. A 3-axis accelerometer translates motion into a dynamic and precise expression signal, which can be applied to a range of effect parameters, including filter sweeps, drive levels, modulation, and wet/dry mixes. The lightweight and wireless ring is capable of transmitting over 100 feet and fits comfortably on the hand, foot, or instrument headstock.

Hot Hand 3 connects to all Soundblox®, Soundblox 2, Soundblox Pro, or Hot Hand pedals via the 1/8” SENSOR OUTPUT. The receiver base station also features a standard 1/4” EXPRESSION OUTPUT compatible with most third-party pedals equipped with a 1/4” expression input, like the Boss PS-5 Pitch Shifter, Eventide Space Reverb, Line 6 DL4, and many more.

The system consists of a wireless sensor ring, ring charger/DC power supply, receiver base station, and sensor cable. The ring is powered by a rechargeable/replaceable lithium ion battery, with an average operation time of 6 hours between charges.

Features & Specifications:

·         Compatible with all Soundblox, Soundblox 2, Soundblox Pro and Hot Hand pedals.

·         Works with most third-party effects equipped with a 1/4” expression input. DIP switches facilitate third-party effect configuration.

·         Select between 3 different motion axes (X,Y, and Z).

·         RF transmitter capable of transmitting over 100 feet.

·         Rechargeable/replaceable lithium ion battery.

·         1/8” SENSOR OUTPUT and 1/4” EXPRESSION OUTPUT.

·         DEPTH and SMOOTHING controls adjust effect amount and ring sensitivity.

·         All components are compatible with the original Hot Hand Wireless Adapter (SA110) 

·         Use up to 4 units simultaneously with no interference.



 

Tel: 01926 886433