Accessories at Bass Direct: Source Audio, Soundblox®, Programmable EQ bass, guitar:: Basses and Guitars

 

Source Audio Soundblox® Pedals

Distortion | Graphic EQ | Nemesis | AftershockDistortion 2 | Reverb 2 | Orbital Modulator

OFD Modeller | Manta | HUB | Gemini | Mercury | Soleman | Reflex


Soundblox2 Bass Distortion  £149.99 free mainland shipping  In stock now!

  1. +£10 Mainland EU/Ireland shipping for outside UK





Soundblox® 2 Multiwave Bass Distortion


The Soundblox 2 Multiwave Bass Distortion includes all the low-end retaining distortion and fuzz tones of the original Soundblox Multiwave Bass Distortion, repackaged in a compact, cast-aluminum housing. The pedal features 23 traditional and non-traditional synth-like effects plus a Clean Boost mode, two user presets, three-band tone control, separate Clean and Distortion Mix knobs, Universal Bypass™ (selectable buffered or true bypass), a three-level noise gate, and a Multi-function input compatible with Hot Hand®, the Source Audio Dual Expression Pedal, or MIDI*. Use the Hot Hand Motion Sensor Ring or the Source Audio Dual Expression Pedal for on-the-fly control over any of the six adjustable parameters or to seamlessly morph from one user preset to the other. Plug in a MIDI controller for external access to presets and parameters.

The Soundblox 2 Multiwave Bass Distortion features both multi band and single band processing. Multi band processing splits the input signal into ten distinct frequencies bands, distorts each one separately then recombines them for the final output signal. The effect is a crisp distortion with superior low-end preservation and note articulation. Single band processing employs a more conventional approach, applying a single distortion element to the entire signal. The processing categories are further broken down into three subcategories: “Normal”, for a more traditional distortion curve, “Foldback”, for an aggressive, synth-like fuzz and “Octave”, for unique octave-up distortion effects.


*Soundblox 2 MIDI functionality requires the Source Audio MIDI Adapter, which is temporarily unavailable. The MIDI Adapter will be available for purchase in Fall 2012.

MULTIWAVE BASS DISTORTION INTERFACE

Roll your mouse over the panel controls to learn about each one.


I/O PORTS

Roll your mouse over the ports to learn about each one.


SOUNDBLOX 2 MULTIWAVE BASS DISTORTION SPECIFICATIONS

•Diverse Sound Palette — Featuring 23 varieties of our unique distortion algorithms with an additional CLEAN BOOST mode.

•Multiband Processing — Signal is split into multiple bands and distorted individually for unprecedented sound clarity.

•Compact, cast aluminium housing.

•2 User Presets easily recalled via two footswitches.

•Universal Bypass — selectable buffered or true bypass.

•3-band tone control — select between “treble”, “mid”, and “bass” for precision tone sculpting.

•Noise Gate — easily activated 3-level noise gate.

•Multi-function In — use an expression pedal or the Hot Hand Motion Sensor to morph between presets or manipulate any of the six assignable parameters.

•MIDI Capable — the Multi-function In jack also allows MIDI access to presets and parameters.

•State-of-the-art DSP — Our proprietary 56-bit Digital Signal Processor, the SA601, and crystal clear 24-bit converters.

•9V DC power supply included

  1. Dimensions: L: 4.5 in./11.4cm x W: 4.5 in./11.4cm x H: 2.25 in./5.7cm (including knobs)
























Shown below from L- R;, OFD Modeller, MANTA, Orbital Modulator, Multi-Wave distortion, MOOER wireless power supply, Hot Hand 3, Pedaltrain MINI pedal board



Dual Expression pedal - £104.95


The Source Audio Dual Expression Pedal delivers precision response and smooth action in a durable cast aluminum housing. Dual TRS expression outputs make it possible to control two effects units simultaneously. The pedal is compatible with any model or brand of effect that features a TRS expression input. The Range Adjust Knob sets the bottom point of the expression range. Plus, a special Sensor Output connects directly to any Hot Hand®, Soundblox®, Soundblox 2, or Soundblox Pro pedal for real-time control over filter sweeps, effect modulation, LFO speeds, wet/dry mixes, drive levels and more.

DUAL EXPRESSION PEDAL PORTS


DUAL EXPRESSION PEDAL FEATURES & SPECIFICATIONS

  1. 1Two Isolated TRS Expression Outputs – simultaneous control over multiple effect pedals or rack systems.

  2. 2Sensor Output — 1/8-inch; four conductor output compatible with all Soundblox, Soundblox 2, or Soundblox Pro pedals.

  3. 3Range Adjust Knob — Adjusts the range of expression signal sent through the outputs.

  4. 4OUTPUT 1: sends expression signal out via either 1/4 inch TRS cable or 4 conductor Soundblox compatible 1/8 inch sensor cable.

  5. 5OUTPUT 2: sends expression signal out via 1/4 inch TRS cable.

  6. 6Rugged, cast aluminum housing.

  7. 7Includes one 1/4-inch TRS connector cable and one 1/8 inch four conductor Sensor Output cable

  8. 8Dimensions: 10 in/25.4cm (Length) x 4 in/10.2cm (width) x 3 in/7.6cm (height)



SA115 Hot Hand® Wireless Adapter £139.99


Description: 

The Hot Hand 3 Universal Wireless Effects Controller expands significantly on the breakthrough technology of the original Hot Hand, broadening its compatibility to include non-Source Audio pedals. A 3-axis accelerometer translates motion into a dynamic and precise expression signal, which can be applied to a range of effect parameters, including filter sweeps, drive levels, modulation, and wet/dry mixes. The lightweight and wireless ring is capable of transmitting over 100 feet and fits comfortably on the hand, foot, or instrument headstock.

Hot Hand 3 connects to all Soundblox®, Soundblox 2, Soundblox Pro, or Hot Hand pedals via the 1/8” SENSOR OUTPUT. The receiver base station also features a standard 1/4” EXPRESSION OUTPUT compatible with most third-party pedals equipped with a 1/4” expression input, like the Boss PS-5 Pitch Shifter, Eventide Space Reverb, Line 6 DL4, and many more.

The system consists of a wireless sensor ring, ring charger/DC power supply, receiver base station, and sensor cable. The ring is powered by a rechargeable/replaceable lithium ion battery, with an average operation time of 6 hours between charges.

Features & Specifications:

·         Compatible with all Soundblox, Soundblox 2, Soundblox Pro and Hot Hand pedals.

·         Works with most third-party effects equipped with a 1/4” expression input. DIP switches facilitate third-party effect configuration.

·         Select between 3 different motion axes (X,Y, and Z).

·         RF transmitter capable of transmitting over 100 feet.

·         Rechargeable/replaceable lithium ion battery.

·         1/8” SENSOR OUTPUT and 1/4” EXPRESSION OUTPUT.

·         DEPTH and SMOOTHING controls adjust effect amount and ring sensitivity.

·         All components are compatible with the original Hot Hand Wireless Adapter (SA110) 

·         Use up to 4 units simultaneously with no interference.



 

Tel: 01926 886433