Rodenberg GAS pedals, GAS-728B+ NG :: for sale, UK, EU, on offer Basses and Guitars :: Bass direct, Warwick

 

707B | 808B | >728B | 798B


GAS-728B+ NG

728B+ NG pedal - £209.00 + inc free mainland shipping

+ £10 EU shipping





Looking inside the GAS-728B+ NG you will find one GAS-707B Clean Boost and one GAS-808B Overdrive pedal put together in the same case, connected serial. The GAS-707B has Tone- and Level controls, the GAS-808B Tone-, Drive and Level controls on the top panel. Both pedals GAS-707B and

GAS-808B have their own Deep Boost switches. The GAS-808B can be switched over into a GAS-909B mode (rocker switch) which features more gain. 

With the BOLT rocker switch you can put the GAS-728B+ NG into bolt or serial switching mode, so you can switch between the two pedals with one footstep. With the <827> switch you can choose the way of the signal path through the pedals. • Signal path 728: Bass =>707B=>808B=>Amp

• Signal path 827: Bass =>808B=>707B=>Amp. The GO! Rocker Switch is for for momentary using mode of the GAS-808B, the GAS-808B is activated by stepping on the footswitch until it is keeping pressed only. Finally the GAS-728B NG includes a True Bypass switching system, with less switching

noise!


Special Features: 

• Two totally independent GAS pedals GAS-707B / GAS-808B in one box

• Internal 18V DC Operation for more (Output)-Level range and headroom

• <-827-> switch => Signal path switchable from GAS-728B to GAS-827B

• GAS-707B (Clean Boost) - Tone and (Output)-Level controls

• GAS-808B (Overdrive) - Tone, (Output)-Level and Overdrive controls

• True Bypass • Long-Life footswitch

• Top panel made of stainless steel • Built like a tank

• Specially dimensioned and selected components

• Illuminated rocker switches when switched to 'ON'

• Bright green and blue vintage Jewel-LEDs

• Powered by an external standard 9 volts power supply adapter.

Current draw: min. 200mA • No battery operation!

• Dimensions (w/d/h (inch)): 4.7 x 3.7 x 1.3  / Weight: 1.1 lbs

• Handmade in small numbers  • 2 years warranty

6x Rocker Switch: on the front panel 

• Deep switch 808B => Deep Boost for GAS-808B (Overdrive)

• Bolt switch => Bolted switching or serial switching action 

• GO! switch => Momentary action for the GAS-808B (Overdrive)

• <-827-> switch => Signal path switchable from GAS-728B to GAS-827B 

909B switch => 808B can be switched over into the 909B mode (More Gain)

• Deep switch 707B  => Deep Boost for GAS-707B (Clean Boost)


Looking inside the GAS-728B+ NG you will find one GAS-707B Clean Boost and one GAS-808B Overdrive pedal put together in the same case, connected serial. The GAS-707B has Tone- and Level controls, the GAS-808B Tone-, Drive and Level controls on the top panel.  Both pedals GAS-707B and GAS-808B have their own Deep Boost switches. The GAS-808B can be switched over into a GAS-909B mode (rocker switch) which features more gain. With the BOLT rocker switch you can put the GAS-728B+ NG into bolt or serial switching mode, so you can switch between the two pedals with one footstep. With the <827> switch you can choose the way of the signal path through the pedals.

• Signal path 728: Bass =>707B=>808B=>Amp • Signal path 827: Bass =>808B=>707B=>Amp. The GO! Rocker Switch is for for momentary using mode of the GAS-808B, the GAS-808B is activated by stepping on the footswitch until it is keeping pressed only. Finally the GAS-728B+ NG includes a  True Bypass switching system, with less switching noise! 

Internal 18 Volts operation for more headroom:

The GAS-728B+ is powered by an external power supply standard 9 Volts DC. Internal the 9 volts are transformed to 18 volts. This gives you more output level range and headroom.

909B switch: - rocker switch

The GAS-808B can be switched over into the GAS-909B mode which offers three times more gain than a standard GAS-808B. 


GO! switch: - rocker switch

When switched to 'on' the GAS-808B (left side) runs in GO! Mode which is a momentary mode. The GAS-808B is activated by stepping on the footswitch and keeping it pressed. It returns to the previous setting by letting go again. So the GO! mode changes the GAS-808B to a momentary playing mode for single notes or little fill ins - only active when stepped on!

In Serial mode the GAS-808B is switched in series to the actual setting (both pedals ON when the right GAS-707B was active before).

In Bolt mode (rocker switch at the front side) it will switch off the previous sound setting (right GAS-707B off when switched to on before) and activate the GAS-808B momentary but will return to the previous setting by letting go again.

Bolt switch: - rocker switch

When switched to ON the pedal runs in Bolt Mode. Each GAS pedal can be activated by stepping on the usual on-off switch at the pedal top but only one of the GAS pedals can be activated at once. Here you can play each GAS pedal alone, but not both at the same time.

The Advantage: Switching from GAS-707B to GAS-808B is only one footstep away, without having to deactivate GAS-707B. It shuts off automatically. Same way around when going from GAS-808B to GAS-707B.

<-827-> - rocker switch

With the <-827-> rocker switch you can change the signal stream of the pedal inside.

'Rocker Switch off' = Signal stream: Bass -> GAS-707B -> GAS-808B -> Amp

'Rocker Switch on' = Signal stream: Bass -> GAS-808B -> GAS-707B -> Amp


Deep Boost: - rocker switch

Both pedals GAS-707B Clean Boost and GAS-808B Overdrive have their own Deep Boost switches.

The Deep Boost lifts the lower frequencies - the overall sound stays defined without getting muddy.


True Bypass:

The footswitches are a True Bypass Long-Life switches. If the GAS pedal is turned off the guitar signal gets passed through to reach the amp without any loss of signal. The GAS pedal is totally switched out of the signal path.


Power supply: double pedals

On the rear side of the pedal you can find the jack for an external power supply. It is a standard jack that is used by nearly all manufacturers of stompboxes. You can use a standard regulated power supply (9V DC, + = outside ring, ground = inside).

The GAS-728B+ NG cannot be powered by battery!

 

Tel: 01926 886433