One spot, universal power supply, CS 7, CS 12 RockBoard Power LT XL Effect Pedal + Smartphone Powerbank, Pedal train Multi power supply for effects pedals, Line 6 convertor, Battery clip, Reverse polarity, 3.5mm convertor :: For sale, UK, EU, Accessories at Bass Direct: Warwick

 
NEW!

The 1 SPOT mA Meter (that’s “milliamp meter” for all you non-engineers), is a simple device for measuring the power consumption of your guitar pedals.

You’re probably used to seeing power supply outputs with ratings like “100mA”, which is the maximum that output can provide for a pedal. And you might have wondered whether it was enough to power your particular pedal(s). The mA Meter answers that question for you by showing exactly how much current your DC powered pedal really needs*.

No more scouring the Web for information about your pedals that might not even be accurate. Just plug your pedal into the mA Meter and see for yourself how much power it needs!

And as an added bonus, we’ve even thrown in a cable tester as part of the mA Meter… perfect for those last second cable checks at the gig.

  1. * Input voltage range: 9-24Vdc;  Max current displayed: 999ma











Truetone 1-Spot Pro CS-7 Power Supply

The world's first power brick with switching power supply technology.

The Truetone 1-Spot Pro CS-7 is a versatile power supply that can power most pedals on the market, whether they are 9, 12 or 18V. The seven outputs mean you can power a reasonably sized board without the power taking up a huge footprint on your board. Truetone have included mounting brackets for Pedaltrain boards and made the power input worldwide, so as long as you've got the right kettle lead you can take your 1-Spot Pro CS-7 on a world tour!

For many years, Truetone has made musicians’ lives easier with the 1 SPOT, the original compact pedalboard power supply. It works so well that a lot of musicians never felt the need to get one of those brick-style power supplies, and we here at Truetone didn’t see the need for those either, even though they were quite popular. Bob Weil, founder of Truetone, explains:

“A lot of people over the years had told us that we should make a power brick. Even some of my own staff urged me to do it, but I didn’t want to for two reasons. First, I knew the 1 SPOT could power just about every pedal out there, so I didn’t see the need. Second, I didn’t want to make just another knock-off of someone else’s power brick. If we were going to make one, we were going to do it our way and have features that nobody else could offer. As pedal designs changed and it became more common for digital pedals to require isolation and for others to need something other than 9Vdc, I finally saw a reason for us to design a power brick.”

“It took 3 years and lots of experimentation, but we were finally able to design a 1 SPOT Pro, using our own proprietary technology to give musicians all the features they need for today’s pedalboards. The original 1 SPOT still works great for most musicians, but for those who need more power and versatility, the 1 SPOT Pro fills the need perfectly.”



1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of small electronic components inside a power brick… old tech that hasn’t changed in decades and has a lot of limitations. We took the same switching power supply technology found in our famous 1 SPOT and scaled it up to make the 1 SPOT Pro models. With much more space to work with, we were able to completely eliminate noise, provide total electrical isolation between outputs, create multiple voltages, and still give you the ability to use it anywhere in the world.

A major benefit of using a switching power supply is that it can handle far more current (power being pulled out of it) than any transformer-based power supply. Although we had to put power rating labels on each output to satisfy certification agencies (yes, we actually certified these, unlike most companies), the outputs can generally handle far more than the label shows. For example, you can connect a 300mA pedal to a 200mA output, without causing any problems. With a transformer-based power supply, you can’t get away with that. The important thing is to not exceed the total of all the labels. With a CS7, the output labels add up to 1900mA total. That means the total current draw of all your pedals should be less than 1900mA. That total current rating is roughly double the current load of the most common power brick, for a lot less money.



Multiple voltages

While most pedals still run off 9VDC, not all of them do. That’s one of the main reasons why we finally decided to design the 1 SPOT Pro. With the CS7, you get one output for 18VDC and six at 9VDC, with four of those switchable to 12VDC. Need another 18VDC output? No problem… just get a Multi-Plug 2 cable (MC2) and run both pedals off that one outlet… most boosts and drive pedals don’t mind sharing an output anyway. Don’t need the 18VDC output at all? No problem… just get Truetone’s 18V to 9V Converter cable (V189).


Worldwide input voltage

Just like with the original 1 SPOT, and your laptop power supply and phone charger, the 1 SPOT Pro uses switching power supply technology which allows you to use it anywhere in the world. The CS12 has an input voltage switch on the back, which switches voltage only for the 9VAC output, since that output does use a toroidal transformer. The rest of the outputs on the CS12, and all of them on the CS7, don’t care what the input voltage is.


Cables


The 1 SPOT Pro includes a generous assortment of cables and converter plugs. The cables are of various lengths, color-coded for easy cable management and with right angle plugs on the pedal end.


Power cables (all are center pin negative polarity):
(4) DC18 (5.5x2.1mm barrel plugs; 18” (457mm) – White
(3) DC12 (5.5x2.1mm barrel plugs; 12” (305mm) – Yellow

Converter Plugs:
(1) CL6 – (5.5x2.1mm barrel input, 5.5x2.5 barrel output; reverse polarity)
Green – for Line 6 DL4/M9/etc. and some Eventide pedals.
(1) CYR – (5.5x2.1mm barrel input, 5.5x2.1 barrel output; reverse polarity)
Red – reverse polarity converter
(1) C35 – (5.5x2.1mm barrel input, 3.5mm male output; tip positive)
Black – 3.5mm (1/8”) plug converter
(1) CBAT – (5.5x2.1mm barrel input, Black battery clip output) Connects to batter clip wires inside pedals that do not have DC jacks. Do NOT connect to a battery!


Pure Isolation

Since pioneering the first switching power supply for musicians, the original 1 SPOT, we’ve gained many years of experience in creating very low noise power for pedals. When we started designing the 1 SPOT Pro, the first multiple output switching power supply, we worried a lot about how to eliminate noise completely. Isolation is part of the solution to noise elimination, but not all of it. Each output is galvanically isolated from the other to help give you pure, clean, noise-free operation of your pedals. However, we also provided an additional layer of pure analog regulation, taking advantage of the greater ability of analog circuits to provide the highest possible suppression of in-band audio noise. There is an artistry involved in these designs, and it’s come at the price of decades of hard work. But all of this put together is what we call Pure Isolation.


Pedaltrain Mounting Brackets

The only power brick to include easy-to-install mounting brackets for Pedaltrain pedalboards. We even duplicated the output labels under the unit, so you can easily see which output is which, when working on your board. Yes, we thought of that too!


Truetone 1-Spot Pro CS-12 Power Supply

The world's first power brick with switching power supply technology.




Similar to the CS7 but with more outputs

  1. 12 fully isolated outputs

  2. 5 voltage options provide power for virtually any effect pedal

    1. Variable 4-9Vdc, 12 Vdc, 18 Vdc, 9Vdc and 9Vac

  3. Designed with cutting-edge technology, not just transformers

    1. Noiseless operation with far more power

  4. Includes brackets for mounting under Pedaltrain® pedalboards

  5. Cables and converter plugs included

  6. Switchable Worldwide Input Voltage



CS6




Multiple Pedal Power

The Truetone Spot Pro CS6 provides power for up to 6 pedals in a compact and low-profile unit, designed to fit on smaller pedalboards or be top-mounted. Each output is isolated, filtered, and free of noise giving you true professional operation in noisy electrical environments. It follows on from the 3 years of development that Truetone took to design their first power supply.

Powers Almost All Pedals

With its many different included cables and adapters, the Truetone CS6 can supply power to almost any pedal on the market. It outputs can be switched through multiple voltages, including 9/12/18v. Two outputs provide a super-high 500mA output at 9v so can be used to power your high current-draw effects pedals that would usually require their own supply.

Superior Technology

The Truetone CS6 uses a custom-designed switching power supply that can handle far more current (power being pulled out of it) than any transformer-based power supply. This gives it a max of 1600mA DC to play with; an astonishing figure from such a small and portable unit. It also allows multiple voltage inputs so provides use in different countries.

Features

  1. 6 isolated outputs for effects pedals

  2. Multiple input voltage range from 100-240v

  3. 2 ouputs capable of 9v 500 mA output for high current-draw pedals

  4. 2 output switchable from 9 to 12v

  5. 2 outputs switchable from 9 to 18v

  6. Slim low-profile design is perfect for small pedalboards or top-mounting

  7. Fully isolated, regulated and filtered outputs

Specifications

  1. Dimensions: 88 x 160 x 31mm (3.46 x 6.30 x 1.22'')

  2. Weight: 0.59kg

  3. Power: 100-240V ac

  4. Included Power Cables (all are center pin negative polarity):

    1. (1) DC26 (5.5 x 2.1mm barrel plugs; 26'' (660mm) – Purple

    2. (1) DC22 (5.5 x 2.1mm barrel plugs; 22'' (559mm) – Blue

    3. (1) DC18 (5.5 x 2.1mm barrel plugs; 18'' (457mm) – White

    4. (3) DC12 (5.5 x 2.1mm barrel plugs; 12'' (305mm) – Yellow

    5. (1) MC2 Two 5.5 x 2.1mm barrel plugs with 5.5 x 2.1mm input socket.

  5. Converter Plugs:

    1. (1) CL6 – (5.5 x 2.1mm barrel input, 5.5 x 2.5 barrel output; reverse polarity)

    2. Green – for Line 6 DL4/M9/etc. and some Eventide pedals.

    3. (1) CYR – (5.5 x 2.1mm barrel input, 5.5 x 2.1 barrel output; reverse polarity)

    4. Red – reverse polarity converter

    5. (1) C35 – (5.5 x 2.1mm barrel input, 3.5mm male output; tip positive)

    6. Black – 3.5mm (1/8'') plug converter

    7. (1) CBAT – (5.5 x 2.1mm barrel input, Black battery clip output) Connects to battery clip wires inside pedals that do not have DC jacks. Do NOT connect to a battery!

  6. Ouput Voltages:

    1. Outputs 1-2: 9VDC (500mA)

    2. Outputs 3-4: 9VDC or 18VDC (100mA)

    3. Outputs 5-6: 9VDC or 12VDC (200mA)






1 Spot Power Supply


What's a 1 SPOT?

A 1 SPOT is the original 9V DC adapter that only takes up 1 Spot on an outlet strip or wall outlet. It solves an annoying problem that people have complained about for years!

•Only takes up ONE position on your outlet strip or wall outlet!!

•Handles from one to over twenty guitar pedals (1700mA max!)

•New heavy duty output cable!

•Use with optional multi-plug cable(s) for powering more than one pedal.
Guaranteed to work with any equipment that uses one of the following adapters (over 90% of the effects pedals on the market!):

•Boss PSA, Boss ACA, Danelectro DA-1, DOD PS-200R, Dunlop ECB-03, Ibanez AC-109, Korg A30950, Morley 9V, Zoom AD-0006.**

•With new converter plugs, the 1 SPOT will work with virtually ANY 9V pedal! ...even Line 6 modeling pedals! **

•Will even convert international voltage (100V-240V) automatically; no transformer needed!

  1. 3 meter (10') cable is almost twice as long as other adapter cable






1 Spot Combo Pack


9v Multiple Pedal Power Supply (Including Link Cables)

With the new 8-plug cable included in this Visual Sound 1 Spot Combo Pack, you can power up to 8 pedals.  And by linking additional Multi-Plug cables, you can power a virtually unlimited number of pedals!  The L6 Converter allows the 1-SPOT to power Line 6 modelling pedals, while the 3.5mm and Battery Clip Converters allow you to power vintage style pedals. 


The New  Visual Sound 1 SPOT Combo Pack consists of a 1 SPOT 9V DC Power Adapter, Multi-Plug 8 Cable, (2) Battery Clip Converters, (2) 3.5mm (1/8?) Converters and an L6 Converter for Line 6 modelling pedals. 

The 1 SPOT is the original 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard. 


The 1 SPOT makes compatibility, polarity, plug size, voltage, etc. easy by providing a guaranteed list of adapters it can replace: Boss PSA, Boss ACA, DOD PS-200R, Morley 9V, Danelectro DA-1, Dunlop ECB-03, Ibanez AC109, and Zoom AD-0006. If your pedal takes one of these adapters (90% of the time), the 1 SPOT is for you.



The EBS AD-9+ is a slim designed power supply that only takes up one outlet spot. It is designed for use with almost every pedal on the market running on 9V DC, and handles all voltages between 100-240V. The output is short circuit protected and deliver clean and hum free 9V DC power. One EBS AD-9+ can supply up to 20 pedals.

  1. Clean & Hum-free DC Power

  2. Power up to 20 Pedals

  3. Super Slim Design

  4. Ultra-light

  5. Short Circuit Protected



Mooer MPPOWER Recheargable Micro Series Cordless Power Supply


Put your pedal board anywhere with worrying about where you put your power supply in. This battery pack will last for up to 50 hours and drive a good sized pedal board.


Rechargeable power supply, Up to 50 hours of lithium battery life, Eco saving (6600mAh) can be recharged up to 800 times, 2000mA output capacity for multiple devices.

Zero power supply background noise, Battery LED indicator, Simple operation with on on/off switch, Features short circuit protection and overheat protection

The kit consists of;

2 x 4 way power splitter leads

1 x Polarity reverse lead

Battery unit

Charger + Lead








The Guitarman GMP02 will power any pedals requiring a 9 volt DC power supply, centre negative, 1000mA.

For most pedals, connect the GMP02 power supply in place of the 9 volt battery. Using the power supply will disconnect the battery. A super compact PSU.



















RockBoard Power LT XL  Effect Pedal + Smartphone  Powerbank


Portable power supply that guitar and bass players alike wish they’ve always had. The RockBoard Power LT XL is a power bank for both effect pedals AND smartphones.





  1. Highly efficient       6.600 mAh

  2. Compact design    ( H ) 115 mm x ( W ) 22 mm x ( D ) 58 mm

  3. Very light               230 gr

  4. USB port                powers smartphones with 5V DC 1A

  5. Outputs                 2 x separate 9V DC outputs with 1 A each

  6. SPECIAL                Chargeable while in use





Multi-Plug 5 Cable

(MC5)

* The ONLY daisy-chain available with right-angle plugs!
* Over 12" between plugs!
* Spring-loaded contacts in the input socket keep the 1 SPOT plugged in securely.
* Link Multi-Plug 5 cables together to power even more effects!


 

 

 

 



Multi-Plug 8 Cable

(MC8)

* The ONLY daisy-chain available with right-angle plugs!
* Over 12" between plugs!
* Spring-loaded contacts in the input socket keep the 1 SPOT plugged in securely.
* Link Multi-Plug 8 cables together to power even more effects!


 

 

 

 





Battery Clip Converter

(CBAT)

* Allows the 1 SPOT and MC5 cable to power anything that runs on a 9V battery










 

 

 

 

Reverse Polarity Converter


Allows the 1 SPOT and MC5 cable to power Yamaha keyboards, samplers, and drum machines, as well as certain reverse polarity effects pedals


 

 

 

 







L6 Converter

(CL6)

* Allows the 1 SPOT and MC5 cable to power Line6 modeling pedals and the Digitech RP100


 

 

 

 







3.5mm Converter

(C35)

* Allows the 1 SPOT and MC5 cable to power Electro-Harmonix, older DOD, and other pedals that require a positive tip 3.5mm (1/8") plug


 

 

 

 











EBS DC Power Split Cables


With the power split cables it is easy to distribute the power from an AD-9 to more than one pedal. The split cables are available in one-to-two, five or six (DC-2, 4 or 6) configuration with straight plugs.




 

POWER SUPPLY UNITS

One spot PSU - £20.00

One spot PSU Combo pack - £35.00

One spot Pro CS 6 power supply  - £119

One spot Pro CS 7 power supply  - £115

One spot Pro CS 12 power supply  - £170

One Spot mA meter - £35

Guitarman GMP02 - 600Ma PSU - £10

Warwick Rockboard LT XL power supply - £40

EBS AD - 9 +, 1000mA  9V supply - £19


EBS DC - 2 power splitter (straight) £6.99

EBS DC - 4 power splitter (straight) £9.00

EBS DC - 6  power splitter (straight) £11.00

One Spot 5 way power splitter (right angle) £12.50

One Spot 8 way power splitter (right angle) £16.50

One Spot Battery Clip convertor £5.00

One Spot Polarity convertor £5.00


For outside the UK please add EU shipping £6

Tel: 01926 886433