MarkBass Nano Mark 300 Bass Amp Head, Amplification, Digital Bass Heads,  For sale, on offer, UK, Lightweight, Warwick, London, Manchester, Birmingham

>Amplifiers | Combos | Cabs | Pedals | Accessories


LMIII Tube | LMIII | Big Bang | LM800 | LMTube800

Multiamp | TTE500/800 | >Nano 300 | Ninja | Evo 1



  1. On Offer £330 inc free UK mainland shipping

  2. Add Gator mini amp bag for £25 when ordered with amp


MarkBass Nano Mark 300 Bass Amp Head

The MarkBass Nano Mark 300 is tiny but loud! At a featherlight 1.6 kg and measuring just 20.5cm x 5.5cm x 23.5cm, you might not expect much from the Nano Mark, but it is LOUD! At 300W and with a four-band EQ, this is a versatile and perfectly giggable head. The simple user interface makes the MarkBass Nano Mark 300 one for those who like to plug in and play without too many with hundreds of knobs. Simply plug in and play!

Markbass have included their MBPT power amp in the Nano Mark 300, which is a contributing factor that signature MarkBass tone. It's very rare for amps of this size to have such quality components, which gives the Nano Mark 300 the edge in the small amp market. Other features you'd normally expect on a full-sized amp include an XLR output, effects loop and tuner output. If you want huge tone without breaking your back, look no further than the MarkBass Nano Mark 300.




MarkBass Nano Mark 300 Bass Amp Head Specs & Features

  1. 1Preamp: Solid State

  2. 2Power Amp: MPT

  3. 3Power: 300W@4ohm / 150W@8ohm

  4. 4Power Supply: Special Markbass Digital Power Supply

  5. 5EQ: LOW, MID/LOW, MID/HIGH, HIGH

  6. 6Other features: XLR Line Out, Tuner Out, FX Send/Return, Pre/Post EQ and GND Lift switches

  7. 7Dimensions: 8.3" / 20.5cm (w) | 2.16" / 5.5cm (h) | 9.25" / 23.5cm (d)

  8. 8Weight: 3.52 lbs / 1.6 kg



TECHNICAL SPECS

INPUTS

  1. INPUT: impedance 2 Mohm, max. voltage 15 Vpp

  2. EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS

  1. GAIN

  2. MASTER VOLUME

  3. GROUND LIFT (switch on rear panel)

  4. PRE/POST EQ (switch on rear panel)

EQUALIZATION

  1. LOW: center frequency: 40 Hz; level: ±16 dB

  2. LOW MID: center frequency: 360 Hz, level: ±16 dB

  3. HIGH MID: center frequency: 800 Hz, level: ±16 dB

  4. HIGH: center frequency: 10 kHz, level: ±16 dB

OUTPUTS

  1. LINE OUT: balanced XLR, max. voltage 20 Vpp

  2. EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)

  3. TUNER OUT: unbalanced, max. voltage 2 Vpp

  4. SPEAKER OUT: speakon/1/4" combo

OTHER

  1. WEIGHT: 3.20 lbs / 1.45 kg

  2. WIDTH: 7.87 in. / 20 cm

  3. DEPTH: 8.27 in. / 21 cm

  4. HEIGHT: 2.09 in. / 5.3 cm

  5. OUTPUT POWER: 300W RMS @ 4 ohm, 150W RMS @ 8 ohm 

  6. POWER REQUIREMENT: 100/120V; 230V; 240V  50/60Hz (Voltage is factory preset according to region of sale)

 

Unit 12, Rigby Close

Heathcote Ind Est

Warwick, CV34 6TH

Tel: 01926 886433