>Amplifiers | Combos | Cabs | Pedals | Accessories


LMIII Tube | LMIII | Big Bang | LM800 | LMTube800

Multiamp | TTE500/800 | Nano 300 | Ninja | >Evo 1



  1. On Offer £699 + £10 UK mainland shipping

  2. Add footswitch controller £99 when ordered with amp

  3. Add Gator amp bag for £29 when ordered with amp


The Markbass EVO 1 is a rEVOlutionary amp, as a result of the mix between classic and advanced technology evolution to allow bassists to have not only just a gorgeous bass sound, but always the right sound - no matter which genre and technique they're playing.

The Markbass EVO 1 offers six amp tone choice for each of the two channels, clean and distorted. One of the most common tricks to get a cutting in the mix sound, or nail a good distorted sound for a bassist is usually to run two signals at the same time: a clean tone and distorted tone. The two channels and mix control allow you to do that easily and efficiently.

The EVO 1 also features separate EQ settings for both channels/amps, classic standard controls, one effects for each channel, MIDI ports, on-board tuner, aux input, headphone output, FX loops, XLR line outputs and a powerful 500 watt Mark Proprietary Technology power amp.

All amps and effects can be downloaded and updated from the Markbass website.


















You can update AMPs choices on each channel at your preference thanks to the MARKBASS EVO 1 SOFTWARE, that also allows to update FX choices for each channel and customize their parameters, plus you can set the Boost level that can be switched on/off via MIDI.


The optional Markbass EVO 1 CONTROLLER allows to engage CH1 / CH2 or MIX both, turn on/off the FX1, FX2 and BOOST, plus accessing the TUNER with MUTE function pressing and holding the boost switch. The Markbass EVO 1 can be controlled also via programmable MIDI pedalboard.

Download the latest version for WIN/MAC in the download area

 

MB EVO 1 Controller


The optional MB EVO 1 CONTROLLER allows to switch between CH1 and CH2, turn on/off the REV1, REV2 and BOOST, plus accessing the TUNER with MUTE function pressing and holding the boost switch. The EVO 1 can be controlled also via programmable MIDI pedalboard.

INPUTS
INPUT 1: impedance 1MΩ 
INPUT 2: impedance 1MΩ
AUX IN: stereo mini-jack 3.5mm
RETURN 1 / RETURN 2: mono jack 1/4" (50KΩ) 
USB: type B
MIDI: DIN 5 poles


OUTPUTS
SPEAKER OUTPUT (4ohms minimum load)
two mono jack 1/4" + one Speakon (in parallel)
PHONES : stereo mini-jack 3.5mm
SEND 1 / SEND 2: mono jack 1/4" (1KΩ)
LINE OUT 1: XLR male balanced  
LINE OUT 2: XLR male balanced  
 

CHANNELS
TWO (with six Virtual AMPs per channel) + MIX mode

EQUALIZATION (per channel)
LOW-MID-HIGH

CONTROLS 
GAIN (per channel)
Amps Selection: 6 for CH1 / 6 for CH2 
LEVEL (per channel)
FX 1 
FX 2
MIX
MASTER
PHONE LEVEL
BOOST

MIDI FUNCTIONS
Switch CH1, CH2, MIX 
FX1 ON/OFF, FX2 ON/OFF 
BOOSTER ON/OFF
MUTE/TUNER
Controllable by the optional Markbass EVO1 Controller / MIDI Pedalboard

OTHER
Channels Switch / Mix
GND Lift switches, PRE/POST MIX  (LINE OUTs)
TUNER (with MUTE function) 
440Hz / half step down / whole step down modes

DIMENSIONS
14.18”/ 36 cm (w); 3.94”/ 10 cm (h); 10”/ 25.4 cm(d)

WEIGHT
7.05 lbs / 3.2 Kg

OUTPUT POWER (MPT Power Amp)
500W RMS @ 4 ohms, 300W RMS @ 8 ohms

POWER REQUIREMENT
100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale).

Markbass amps/combos are manufactured to be sold and used in the country of purchase, and are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.



 


 

Mark Bass Evo 1 Bass Amp Head, Richard Bona Amplification, Digital Bass Heads,  For sale, on offer, UK, Lightweight UK, EU, USA, Birmingham. London, Manchester


Unit 12, Rigby Close

Heathcote Ind Est

Warwick, CV34 6TH

Tel: 01926 886433