Creation Audio Labs :: Holy Fire Distortion Overdrive pedal, 9v, 18v :: for sale, UK, EU, Bassdirect, Warwick Bass Guitar Accessories ::

 

Grizzly Bass | Funkulator | Redeemer Circuit | Boost Pedal | >Holy Fire Distortion | MW1


Creation Audio - The Holy Fire PEDAL

THE ULTIMATE DISTORTION/OVERDRIVE PEDAL

Holy Fire 48v* - £195 + £5 UK shipping

Holy Fire 9v - £195  + £5 UK shipping

EU/Ireland shipping + £5 (£10 in total)

* comes with dedicated 48v power supply



Featuring pro-audio quality overdrive, distortion and gain functions with high-cut control and unique L.E.D. interaction. This ultra-wide bandwidth pedal responds exactly like a tube without changing your tone and is unbelievably quiet.

The Holy Fire is a different approach to overdrive and distortion pedals. It’s extremely responsive. Go from overdriven sounds to clean tones by rolling back the volume knob on your instrument. Retain your full tone spectrum, boost or cut your volume and dial in YOUR tone.

48v power supply included. This pedal must be used with the included, dedicated worldwide power supply.

Pedal Dimensions: 3.25" wide x 4.75" long x 2.5" tall (at top of the knob)


Quick Start Guide


1. Start with “G” (gain) at noon, “O” (overdrive) and “D” (distortion) all the way off (counterclockwise) and the “~” (hi-cut) all the way up (clockwise). At this point, as you click the pedal in and out the sound should be pretty much the same.

2. Then as you turn up the “O” the level will increase and begin to overdrive (the LED turns yellow when it is overdriving) – you may want to turn down the “G” to keep the volume at unity.

3. Then as you turn up the “D” the sound will begin to clip and past 2 o’clock it will start to compress and you may want to bump-up the “G” to make-up a little volume.

4. The “~” hi-cut control will shave off the highs as you turn it down.

  1. 5.The “O” and “D” knobs interact with each other to create unique blends of the two.
















New HOLY FIRE 9 - OVERDRIVE DISTORTION EFFECT PEDAL w/CLEAN BOOST - 9V

Transparent GAIN, dynamic smooth OVERDRIVE, thick rich DISTORTION

The Holy Fire 9 is simply the best, A Holy Fire with our new power circuit that steps-up a standard 9VDC pedal power supply to the voltage required by the wave shaping circuitry.  This ultra-wide bandwidth pedal responds exactly like a tube without changing your tone and is unbelievably quiet.

 

  1. Clean Boost - from off to +12dB.

  2. Overdrive - analog wave shaping tube simulator technology.

  3. Distortion - Hard edge clipping circuitry.

  4. Hi-cut filter to shape edges for vintage speaker simulation.

  5. Unique LED interaction indicates the transition to wave shaping.

  6. Pristine buffered bypass, True bypass optional.

  7. Uses 9VDC 250mA* standard pedal power 5.5 x 2.1mm barrel connector.

  8. Small footprint 3.1" x 4.25".

 

Typical distortion pedals use a ton of gain and clipping.  This creates a lot of unwanted noise which needs to be heavily filtered and that thins out the tone. TheHoly Fire introduced the world to analog wave-shaping technology to re-shape the waveform and achieve tube-like FX without adding noise or heavy filters.  The pristine analog process preserves all of your original tone.

 

This makes the Holy Fire 9 overdrive distortion a very musical pedal that responds to your touch. Play with a softer attack and velocity for a cleaner sound, or dig in to get as much grit as you want.  You control the effect with your playing dynamics and the volume of your instrument.  Great for guitar or bass!  Like a tube preamp in a pedal, but without the bulky, fragile and expensive tubes and transformers.

 

*For best results use the High-Current output of your pedal power brick.








  1. See also;

  2. EBS Multidrive

  3. Sound Source Multiwave Distortion

  4. XOTIC RC Booster

  5. Darkglass B3K





 

Unit 12, Rigby Close

Heathcote Ind Est

Warwick, CV34 6TH

Tel: 01926 886433